Siemens 6GK1411-1AC00, Руководство по эксплуатации

Страница: 103 / 150

Configuration
4.10 Data points
SIMATIC CC7
Operating Instructions, 10/2019, C79000-G8976-C503-02
103
Selection of data points using the selection column
Using the check boxes in the selection column on the left in the table, you can select
individual data points for copying, deleting and multi-editing.
You use the top check box in the table header to select all data points of the table.
Deleting data points
Note
Delete
You cannot undo deleting a data point.
You can delete individual data points using the "Delete" symbol in each row of the data point
table.
You can delete multiple data points by selecting them using the selection column (left) and
then clicking on the "Delete" button below the table.
Data point table
Configure the parameters of the data points in the table and save it. You can correct or
delete incorrect data points in the table.
The parameters are different depending on the transfer protocol of the data points. The list
below contains all parameters that can be configured for S7 and Modbus/TCP.
● Selection column
By using the check boxes in the left-hand column, you can select all, individual or multiple
rows for multi-editing, copying or deleting.
● Target
Select the target system you wish to use for the respective data point.
–
-
No target system is assigned to the data point. Data is not being read or transferred.
– Cloud
– OPC UA
● Data point name
Assign a unique name to the data point.
● Data type
Configured data point of the data area of the data point to be read
You can find the data types supported in the table of data types below.