SICK safeRS3, Руководство по эксплуатации

Страница: 13 / 120

3 Safety
3.1 Safety information
3.1.1 Safety messages
Warnings related to the safety of the user and of the equipment as envisaged in this
document are as follows:
WARNING
Indicates a hazardous situation which, if not avoided, may cause death or serious injury.
NOTICE
Indicates obligations that if not observed may cause harm to the equipment.
3.1.2 Safety symbols on the product
This symbol marked on the product indicates that the manual must be consulted. In
particular, pay attention to the following activities:
l
wiring of the connections (see Terminal blocks and connector pin-outs on page 102
and Electrical connections on page 104 )
l
cable operating temperature (see Terminal blocks and connector pin-outs on
page 102 )
l
control cover, which was subjected to a low energy impact test (see Technical data
on page 96 )
3.1.3 Personnel skills
The recipients of this manual and the skills required for each activity presented herein
are as follows:
Recipient Assignments Skills
Machinery
manufacturer
l
Defines which protective devices
should be installed and sets the
installation specifications
l
Knowledge of significant hazards of
the machinery that must be reduced
based on risk assessment.
l
Knowledge of the entire machinery
safety system and the system on
which it is installed.
Protection
system
installer
l
Installs the system
l
Configures the system
l
Prints configuration reports
l
Advanced technical knowledge in the
electrical and industrial safety fields
l
Knowledge of the dimensions of the
dangerous area of the machinery to
be monitored
l
Receives instructions from the
machinery manufacturer
Machinery
maintenance
technician
l
Performs maintenance on the
system
l
Advanced technical knowledge in the
electrical and industrial safety fields
3 SAFETY
8027489/2022-03-01 | SICK
Subject to change without notice
O P E R A T I N G I N S T R U C T I O N S | safeRS3
13