SICK safeRS3, Руководство по эксплуатации

Страница: 7 / 120

7.3 Validate the safety functions 73
7.3.1 Validation 73
7.3.2 Validate the access detection function 73
7.3.3 Example of access points 74
7.3.4 Validate the restart prevention function 74
7.3.5 Example of stopping points 75
7.3.6 Validate the system with safeRS3 Designer 75
7.3.7 Troubleshooting validation 76
7.4 Manage the configuration 76
7.4.1 Configuration reports 76
7.4.2 Change the configuration 76
7.4.3 Back up the configuration 77
7.4.4 Load a configuration 77
7.4.5 Display previous configurations 77
7.5 Other functions 77
7.5.1 Change language 77
7.5.2 Application type selection 77
7.5.3 Locate the area with detected motion 78
7.5.4 Restore factory default settings 78
7.5.5 Identify a sensor 78
7.5.6 Change network parameters 78
7.5.7 Change Modbus parameters 78
7.5.8 Change Fieldbus parameters 78
8 Maintenance and troubleshooting 79
8.1 Troubleshooting 79
8.1.1 Control LED 79
8.1.2 Sensor LED 81
8.1.3 Other problems 82
8.2 Event log management 83
8.2.1 Introduction 83
8.2.2 Download the system log 83
8.2.3 Log file sections 83
8.2.4 Log line structure 83
8.2.5 Timestamp (seconds counter from the latest boot) 84
8.2.6 Timestamp (absolute/relative value) 84
8.2.7 Event description 84
8.2.8 Log file example 85
8.2.9 Event list 85
8.2.10 Verbosity level 86
8.2.11 Verbosity level for detection access and exit events 86
8.3 INFO events 87
8.3.1 System Boot 87
8.3.2 System configuration 87
8.3.3 Factory reset 88
8.3.4 Stop signal 88
8.3.5 Restart signal 88
8.3.6 Detection access 88
8027489/2022-03-01 | SICK
Subject to change without notice
O P E R A T I N G I N S T R U C T I O N S | safeRS3
7