2 ms, an external resistance must be added if the resistor of the external load is greater
than the maximum resistive load allowed (see
).
Below are some standard values for the external resistor:
OSSD Pulse width value
External resistor (R
e
)
300 μs
1 kΩ
2 ms
10 kΩ
4.3
safeRS3 Sensor
4.3.1
Functions
The sensors perform the following functions:
l
Detect motion in their field of view.
l
Send the motion detection signal to the control through CAN bus.
l
Signal to the control through CAN bus the failures or faults detected on the sensor
during diagnostics.
4.3.2
2-axes structure
Part
Description
A
Sensor
B
Status LED
C
Tamper-proof screws to position the sensor at a specific angle around x-
axis (tilt 10° steps)
4 GET TO KNOW SAFERS3
8027489/2022-03-01 | SICK
Subject to change without notice
O P E R A T I N G I N S T R U C T I O N S | safeRS3
27
