SICK safeRS3, Руководство по эксплуатации

Страница: 86 / 120

86
O P E R A T I N G I N S T R U C T I O N S | safeRS3 8027489/2022-03-01 | SICK
Subject to change without notice
8 MAINTENANCE AND TROUBLESHOOTING
Event Type
Detection exit INFO
Dynamic configuration in use INFO
Muting status INFO
Fieldbus connection INFO
Modbus connection INFO
Session authentication INFO
Validation INFO
Log download INFO
For further information about the events, see INFO events on the next page and
ERROR events (control) on page 90 .
8.2.10 Verbosity level
There are six verbosity levels for the log. The verbosity can be set during the
configuration of the system via the safeRS3 Designer application (
Settings > Activity
History > Log verbosity level ).
Depending on the selected verbosity level, the events are logged in accordance to the
following table:
Event
Level 0
(default)
Level 1 Level 2 Level 3 Level 4 Level 5
Diagnostic errors x x x x x x
System Boot x x x x x x
System configuration x x x x x x
Factory reset x x x x x x
Stop signal x x x x x x
Restart signal x x x x x x
Detection access - See Verbosity level for detection access and exit
events below
Detection exit - See Verbosity level for detection access and exit
events below
Dynamic configuration in
use - - - - x x
Muting status - - - - - x
8.2.11 Verbosity level for detection access and exit events
Depending on the selected verbosity level, the detection access and exit events are
logged as follows:
l
LEVEL 0: no detection info is logged
l
LEVEL 1: the events are logged at control level and the additional information are the
detection distance (in mm) and the detection angle (in °) in detection access.
Format:
CONTROL Detection access (distance mm/azimuth°)