SICK safeRS3, Руководство по эксплуатации

Страница: 6 / 120

6
O P E R A T I N G I N S T R U C T I O N S | safeRS3 8027489/2022-03-01 | SICK
Subject to change without notice
6.2.3 Dimensions for the access detection function 55
6.2.4 Dimensions for the restart prevention function 55
6.2.5 Position of the field of view 56
6.3 Dangerous area calculation 57
6.3.1 Introduction 57
6.3.2 Formula 57
6.4 Calculation of range of distances 58
6.4.1 Introduction 58
6.4.2 Legend 58
6.4.3 Installation configurations 58
6.4.4 Calculate the range of distances 58
6.4.5 Calculate the real detection distance 59
6.5 Sensor position recommendations 59
6.5.1 For access detection function 59
6.5.2 For access control of an entrance 60
6.6 Installations on moving elements 60
6.6.1 Introduction 60
6.6.2 Speed limits 60
6.6.3 Detection signal generation conditions 61
6.6.4 Prevention of unexpected restart 61
6.6.5 Recommendations for positioning the sensor 61
6.7 Outdoor installations 62
6.7.1 Position exposed to precipitation 62
6.7.2 Recommendations for covering the sensor 62
6.7.3 Recommendations for positioning the sensor 62
6.7.4 Position not exposed to precipitation 63
7 Installation and use procedures 64
7.1 Before installation 64
7.1.1 Materials required 64
7.1.2 Operating system required 64
7.1.3 Install the safeRS3 Designer application 64
7.1.4 Initiate safeRS3 64
7.2 Install and configure safeRS3 65
7.2.1 Install the control 65
7.2.2 Synchronize the controls 65
7.2.3 Define the area to be monitored 66
7.2.4 Configure the inputs and outputs 66
7.2.5 Install the sensors 67
7.2.6 Mount bracket for z-axis rotation (roll) 69
7.2.7 Examples of sensor installation 70
7.2.8 Connect the control to the sensors 71
7.2.9 Assign the Node IDs 71
7.2.10 Chain examples 72
7.2.11 Save and print the configuration 73
7.2.12 Set the control Ethernet parameters 73