8
MAINTENANCE AND REPAIRS
8020065-ZSP4/2017-08-10|SICK
O P E R A T I N G I N S T R U C T I O N S | Master Data Analyzer
Subject to change without notice
98
8.1.1
Visual inspection for mechanical and electrical damage
Inspect the measurement system for mechanical and electrical damage.
Visual inspection of the cables
▸
Check that all cable connections are securely attached.
HAZARD
Hazards caused by damaged cable insulation
There is a risk of electrocution if the insulation on the connecting cables for the voltage
supply is damaged.
Measures
▸
Report any damaged cables to the maintenance team without delay.
WARNING
Hazards due to loose connections or scorched cables
Defects such as loose connections or scorched cables must be rectified immediately.
Measures
▸
Report any loose or damaged cables to the maintenance team without delay.
Inspecting the linear guides
As opposed to a sliding guide, linear guides are hardly subject to any notable wear and
tear.
▸
Nevertheless, it should still be ensured at regular intervals that the measurement
gantry travels smoothly along the linear guides and with an equal level of resistance.
▸
Ensure that the movement is not hindered by contamination or objects.
WARNING
Risk of damage due to manual lubrication
The linear guides are self-lubricating.
Measures
▸
Do
not
oil or lubricate the linear guides.
NOTE
Risk of damage if measurement gantry is in slanted position
If the measurement gantry does not run smoothly even after removing any possible
objects disrupting its path this may denote that the measurement gantry is in a slightly
slanted position.
Measures
▸
Please contact the manufacturer directly in this case.
