4
TRANSPORT, ASSEMBLY, AND MOUNTING
8020065-ZSP4/2017-08-10|SICK
O P E R A T I N G I N S T R U C T I O N S | Master Data Analyzer
Subject to change without notice
44
4.5
Mounting
4.5.1
Ready to go
All components of the Master Data Analyzer are attached to the housing with mounting
kits and are cabled together. The light grids are mounted in the gantry and aligned with
each other. The hand-held scanner is ready for operation in its holder.
If you are using the
MDA650 Image/MDA800 Image
, the IP camera is pre-installed on
the upper frame of the measurement gantry.
No further mounting work is required.
4.5.2
Mounting the WLAN module
A WLAN module is available as an accessory for mobile use of the Master Data Analyzer.
The WLAN module is mounted directly onto the housing of the MDA.
The MDA housing wall has two drill holes with the required spacing on the connection side
to accommodate the WLAN module. Two fixing screws are included with delivery for this
purpose.
Fig. 29: Mounting the WLAN module
Mounting
1. Place the WLAN adapter with the two drill holes over the drill holes on the MDA housing.
2. Fasten the device with the two fixing screws.
