4
TRANSPORT, ASSEMBLY, AND MOUNTING
8020065-ZSP4/2017-08-10|SICK
O P E R A T I N G I N S T R U C T I O N S | Master Data Analyzer
Subject to change without notice
38
4.2
Transporting the MDA to its location of use
It is best to transport the package in its packaging until you reach the location where the
device is to be used.
The transport crate must always be kept upright and in a horizontal position when being
transported.
Under no circumstances, and not even for a short time, should it be turned over or stored
on its side.
WARNING
Risk of injury from suspended load
The Master Data Analyzer is delivered in a transport crate on a pallet. Use a suitable lifting
device to unload and transport the device.
During transport, tipping or falling loads pose a risk of severe injury or damage to
property.
Measures
▸
Only use lifting equipment which is suitable for the weight and dimensions of the
freight.
▸
Make sure that the center of gravity is in the center between the forks of the lifting
device and the forks are completely entrenched under the transport pallet.
▸
Do not stop underneath the suspended load.
▸
Wear safety shoes in addition to your personal protective equipment.
Transport with manned forklift truck/lifting truck
Use a manned forklift truck or a suitable lifting truck to transport the crate.
1. Pick up the pallet with the forks.
▸
Make sure that the center of gravity is in the center between the forks and the forks
are completely entrenched under the transport pallet.
Fig. 25: Transporting with a lifting device
2. Transport the load to the place of use.
3. Carefully set down the pallet at the operation site.
Note
