TRANSPORT, ASSEMBLY, AND MOUNTING
4
39
8020065-ZLP4/2017-08-10|SICK
Subject to change without notice
O P E R A T I N G I N S T R U C T I O N S | Master Data Analyzer
4.3
Unpacking and setting up the device
4.3.1
Unpacking the MDA
Instructions for unpacking can be found on the outside of the transportation crate which
is used to deliver the device.
▸
While unpacking, follow all stages in the unpacking instructions.
NOTE
All work relating to the installation of the device must only be done in consideration of the
relevant safety regulations.
WARNING
Risk of injury due to components falling over
The side panels and lid of the transport crate are heavy and difficult to handle.
Falling objects pose a risk of crushing during dismantling.
Measures
▸
Always use
2
people to mount the side panels and lid.
▸
Wear protective shoes in addition to your personal protective equipment.
WARNING
Risk of injury when lifting heavy objects.
There is a risk of injury when lifting heavy objects.
Depending on the system variant, the MDA weighs around 65 kg to 80 kg.
Measures
▸
Use
4
people to lift the MDA.
▸
In order to do this, use the four handles on the two long sides of the MDA.
▸
Lift and carry the MDA according to ergonomic principles.
▸
Wear protective shoes in addition to your personal protective equipment.
WARNING
Impermissible handling of the device
There is a risk of damage to the device when lifting the MDA using the measurement
gantry.
Measures
▸
Do not lift the MDA using the measurement gantry under any circumstances!
Disassembling the transport crate
The lid and side panels are secured with screws.
1. Unscrew and remove the screws from the lid and lift the lid from the transportation crate.
2. Unscrew and remove the screws in order from the four side panels and then remove
them.
3. The Master Data Analyzer can now be accessed from all sides.
