SICK EuroFID, Руководство по эксплуатации

Страница: 63 / 214

Installation of the Operating Unit
EuroFID · Operating Instructions · 8011094 V2.3 · © SICK AG 63
6.3.4
Analog inputs
Application
The analog inputs (AI1 … AI4) should only be connected if the EuroFID software uses these
inputs. This only applies to special versions – please check whether corresponding
technical information was supplied.
Possible functions
The analog inputs can be used to monitor other devices by means of an analog signal. To
this purpose the EuroFID software contains several functions which can be activated in the
“Expert level” sub-menu. The function parameters are adapted to individual customer
requirements (programming at the manufacturer's works).
Input signal
●
Input signal range for the analog inputs: 0 … 10 V.
●
Maximum permissible input signal: 10 V.
If the input signal is not in the permissible range, a malfunction message is
activated (overflow, service requirement or failure – depending on the
activated function version).