SICK DUSTHUNTER SP100 Ex-3K, Руководство по эксплуатации

Страница: 5 / 140

Contents
5 8020216/19YN/V3-0/2020-12 | SICK O P E R A T I N G I N S T R U C T I O N S | DUSTHUNTER SP100 Ex-3K
Subject to change without notice
8 Commissioning ........................................................................................65
8.1 Safety information on commissioning..........................................................65
8.2 Requirements for commissioning ................................................................65
8.3 Inserting and switching on............................................................................66
8.3.1
Adapting the sender/receiver unit to the duct geometry............66
8.3.2 Fitting and connecting the sender/receiver unit.........................66
8.4 Recognizing the safe operating state...........................................................67
9 Configuring................................................................................................68
9.1 Prerequisites .................................................................................................68
9.2 SOPAS ET.......................................................................................................68
9.2.1
Install SOPAS ET ...........................................................................68
9.2.2 Password for SOPAS ET menus....................................................68
9.2.3 Changing the password for SOPAS ET menus .............................69
9.3 Connecting to the MCUDH Ex-3K control unit..............................................69
9.3.1
Connection via RS485 Service interface .....................................69
9.3.2 Connecting to the MCUDH Ex-3K control unit via Ethernet ........70
9.3.3 Configuring the RS485 Modbus ASCII/RTU Interface module ...71
9.3.4 Connecting a remote Ethernet Interface module........................72
9.4 Connecting to the MCU control unit .............................................................72
9.4.1
Connection to device via Ethernet ...............................................72
9.4.2 Configuring the Interface module of the MCU control unit .........73
9.4.3 Configuring the MCU control unit Ethernet module ...................74
9.5 System configuration ....................................................................................75
9.5.1
Application parameters ................................................................75
9.5.2 Assigning the control unit to the sender/receiver unit ...............76
9.5.3 Factory settings.............................................................................77
9.5.4 Setting the function check ...........................................................78
9.5.5 Setting the analog outputs parameters.......................................79
9.5.6 Setting the analog inputs parameters .........................................81
9.5.7 Setting the response time ............................................................82
9.5.8 Calibration for dust concentration measurement .......................82
9.5.9 Changing display settings.............................................................84
9.6 Finding the DUSTHUNTER COM port ............................................................86
10 Operation ..................................................................................................87
10.1 Operating concept.........................................................................................87
10.2 User groups ...................................................................................................87
10.2.1 Changing the password for user groups ......................................87
10.3 MCUDH Ex-3K displays and operating elements .........................................88
10.4 MCUDH Ex-3K control unit buttons ..............................................................89
10.5 MCU control unit displays and operating elements.....................................90