SICK DUSTHUNTER SP100 Ex-3K, Руководство по эксплуатации

Страница: 78 / 140

78 8020216/19YN/V3-0/2020-12| SICK O P E R A T I N G I N S T R U C T I O N S | DUSTHUNTER SP100 Ex-3K
Subject to change without notice
9
CONFIGURING
9.5.4 Setting the function check
Interval time, control value output on the analog output and the starting timepoint for auto-
matic function check can be modified in the “Adjustment / Function Check - Automatic”
directory.
Fig. 45: SOPAS ET menu: MCU/Adjustment/Function Check - Automatic (example)
Table 17: Function check setting options
Standard values: see “Factory settings”, page 77
Entry field Parameter Remark
Function control
Output duration of
Value in seconds Output duration of control values.
Function check interval Time between two
check cycles
see “Function check”, page 33
Function control
Start Time
Hour Defining a start timepoint in hours and minutes.
Minute
The value measured last is output during control value determination ( see “Function
check”, page 33 ).