COMMISSIONING
6
99
8020776/12AX / 2019-05-31|SICK
Subject to change without notice
O P E R A T I N G I N S T R U C T I O N S |Free Flow Profiler
Set the following parameters to configure the FTP transfer:
Parameters
Description
FtpBasePath
FTP root directory
FtpPassword
FTP password for accessing the customer's FTP server.
FtpServerAddress
IP address of the customer FTP server to which the measurement
results are to be uploaded.
If the IP address is not in the same number range as the Traffic
Controller FPS, the (correct) IP gateway must be set within the IP
configuration.
FtpServerPort
The port via which the connection to the FTP server is to be established.
FtpUserName
FTP user name granting access to the FTP server.
UNC Storage
The
UNC Storage
plug-in enables vehicle data to be saved in a UNC path automatically.
UNC paths allow a directory on the network to be accessed without the need for a drive
letter. The data are not stored on the Traffic Controller FPS.
▸
Open the detail window for the
UNC Storage
plug-in.
Configure the UNC path as follows:
Parameters
Description
BasePath
Defines the network directory.
The network directory has to be shared so that it can be accessed.
UNCDomainName
UNCPassword
UNCUsername
A Windows user must have been granted write access to the shared
network directory.
If this user is not a domain user, the computer name must be entered
under the
UNCDomainName
parameter.
Example
\\SRV1\Vehicles\Road1
UncDomainName:
SRV1
UncUserName:
tems_user
UncPassword:
sAfE_PassWord
