COMMISSIONING
6
65
8020776/12AX / 2019-05-31|SICK
Subject to change without notice
O P E R A T I N G I N S T R U C T I O N S |Free Flow Profiler
6.3
Configuring the IP address of the Traffic Controller FPS
Upon delivery, the default IP address of the Traffic Controller FPS is 192.168.10.200.
The IP address of the Traffic Controller FPS is configured in TEMS Manager. If you want
to connect to TEMS Manager from a client computer, the IP addresses of the Traffic
Controller and the client computer must be in the same address range.
The default IP address of the Traffic Controller FPS usually differs from the address range
of the customer network. Therefore, the first step is to change the IP address of a
configuration PC that is not connected to the customer network to make it compatible
with the address range of the Traffic Controller FPS.
Only then will you be able to access TEMS Manager and change the IP address of the
Traffic Controller FPS to the address range of the customer network.
Changing the IP address of the configuration PC
1. Change the IP address of the configuration PC. Assign an IP address within the address
range of the Traffic Controller FPS.
2. Connect the configuration PC directly to the Traffic Controller FPS via the
Ethernet 1
interface.
Fig. 65: Changing the IP address of the configuration PC
Starting TEMS Manager
Now connect to TEMS Manager via the configuration PC.
An up-to-date version of a web browser must be installed on the configuration computer.
This browser must support
HTML5
and
WebGL
.
1. Start the web browser on the configuration PC.
2. Enter the default IP address of the Traffic Controller FPS in the address line.
