SICK 1088784, Руководство по эксплуатации

Страница: 113 / 180

COMMISSIONING 6
113
8020776/12AX / 2019-05-31|SICK
Subject to change without notice
O P E R A T I N G I N S T R U C T I O N S |Free Flow Profiler
Displaying the vehicle class on the basis of the output category system
1. Show the Category External column using the tool icon.
In the Category External area, the vehicle class is determined and reported on the
basis of the selected output category system. In this case, reference is no longer made
to all the vehicle classes within the selected category system because the configured
classification groups are used instead (see also chapter
3.3.3 Operating principle of
the vehicle classification function ).
2. Click inside the “Category External” field to open the Additional Values window. This
enables you to see the confidence level with which the vehicle has been assigned to
the output category in question.
By grouping the vehicle classes together in this way, a higher confidence level can be
achieved than when the vehicle is assigned on the basis of all the classes within the set
category system.
6.9.3.3 Measuring the vehicle area in the 3D model
The 3D model on the details page has a function you can use to measure individual areas
of the vehicle shown. This allows you to identify and check the dimensions of the towing
vehicle or the distance between the towing vehicle and the trailer, for example.
▸
Go to the toolbar in the 3D model area and click the Measure icon.
Regardless of which graphical display you have selected, a box containing the maximum
vehicle dimensions appears above the vehicle. The dimensions of this box are displayed
in the upper right area of the 3D view. The values correspond to the maximum vehicle
dimensions after invoking the function.
Note