Shindaiwa DGW400DM-C, Руководство владельца и оператора

Страница: 41 / 48

- 38 -
•
Warning: Electric Shock/Injury
•
Do not touch the equipment during operation if the equipment or your
body is wet.
•
Always be sure to stop the engine and remove the starter key before
performing any equipment check or maintenance.
•
Do not operate the equipment with any doors or covers open. There is a
danger of hair, body parts and other items being caught up in moving
parts such as cooling fans and belts.
Warning: Fire
•
Always be sure to stop the engine when inspecting fuel or refueling, and
absolutely never perform such tasks near fire or other open flame. Wait
until the engine has completely cooled before inspecting fuel or refueling.
•
Always be sure to wipe up any spilled fuel or oil.
•
Spilled fuel and oil accumulates in the spill containment. Do not operate
the equipment with liquid accumulated in the spill containment.
•
Absolutely never use the equipment if there is a fuel, oil or cooling water
leak, and be sure to always repair the leak before using.
•
Absolutely never inspect or perform maintenance to the equipment near
fire or other open flame.
Warning: Injury to Eyes and Skin
•
Use protective gear, such as rubber gloves, when inspecting or replacing
the battery due to the dilute sulfuric acid in the battery fluid. Be sure that
fluid does not get into eyes, or on skin or clothing.
•
If battery fluid gets into the eyes, or on the skin or clothing, immediately
wash with a large amount of water, and always be especially sure to
seek medical attention if it gets into the eyes.
Warning: Explosion
•
Do not operate the equipment or recharge the battery when the battery
fluid level is below the lower level.
•
Do not generate any sparks near the battery and do not allow any fire or
other open flame near the equipment because the battery generates
ignitable gas.
Caution: Burn
•
The engine, muffler and similar parts are extremely hot during operation
and immediately after stopping the equipment. Never touch hot parts.
•
Never open the radiator cap during operation or immediately after
stopping the equipment. Hot cooling water and steam will spurt out.
•
Always be sure to stop the engine and allow it to cool before inspecting
or changing the engine oil. Opening the oil gauge or oil plug during
operation will result in hot oil spurting out.
13. Troubleshooting