Shindaiwa DGW400DM-C, Руководство владельца и оператора

Страница: 17 / 48

- 14 -
5-7
．
． ．
．
Error Code Display
The equipment includes an error
code display function that notifies the
operator of any errors during
operation. If an error is detected
during operation, error codes are
displayed by the DC meter. If this
occurs, stop operation immediately,
and inspect and repair the location
where the error has occurred.
（
Refer to section "13
．
Troubleshooting" .
）
5-8
．
． ．
．
Monitor Lamp
Warning: Injury/Electric Shock
•
Do not operate the equipment with any doors or covers open. There is a
danger of hair, body parts and other items being caught up in moving
parts such as cooling fans and belts.
Caution: Burn
•
The engine, muffler and similar parts are extremely hot during operation
and immediately after stopping the equipment. Never touch hot parts.
•
Never open the radiator cap during operation or immediately after
stopping the equipment. Hot cooling water and steam will spurt out.
•
Always be sure to stop the engine and allow it to cool before inspecting
or changing the engine oil. Opening the oil gauge or oil plug during
operation will result in hot oil spurting out.
The equipment includes monitor lamps for
"WATER TEMP" , "CHARGE" , "OIL
PRESS" and "SPILL CONTAINMENT" .
If the equipment is normal, the "CHARGE"
and "OIL PRESS" monitor lamps light up
when the starter switch is switched from
"STOP" to "RUN" , and all monitor lamps
turn off when the engine is started. If any
error besides that of spill containment
occurs during operation, the corresponding
monitor lamp lights up and the engine is
automatically stopped.
If the engine is automatically stopped, return the starter switch to "STOP" and
restart the engine.
Watch the lit/unlit status of the monitor lamps the next time an
automatic stop occurs and check the error contents.
(1) Water Temperature Monitor Lamp
The water temperature monitor lamp ("WATER TEMP") lights up and the engine is
automatically stopped if the cooling water temperature becomes irregularly high
during operation.
If this occurs, inspect the water level of the sub tank and add
cooling water if the water level is insufficient.
（
Refer to section "6-2
．
Cooling Water
Inspection" .
）
If the cooling water in the sub tank is at the specified level, it is probable that
overloading is the cause. Use within the rated output.
Error Code Display
Spill
Containment
Oil Press
Charge
Water Temp