Shindaiwa DGW400DM-C, Руководство владельца и оператора

Страница: 40 / 48

- 37 -
7) Pour water into the spill containment and check that there is no leakage.
(After checking, drain the water you have used.)
8) Install the spill containment to the equipment in the reverse order of removal.
<<<<
Note
>>>>
•
Do not operate the equipment with the spill containment separated.
•
If liquid drained from the spill containment during cleaning contains oily
components, dispose of it in a manner according to the applicable laws and
regulations.
•
If the spill containment has a leak, request repair at the retail outlet where the
equipment was purchased.
•
Warning: Electric Shock/Injury
•
Always be sure to stop the engine and remove the starter key before
performing any equipment check or maintenance.
•
Do not operate the equipment with any doors or covers open. There is a
danger of hair, body parts and other items being caught up in moving
parts such as cooling fans and belts.
•
Do not modify the equipment and do not operate with parts removed.
Warning: Fire
•
Always be sure to stop the engine when inspecting fuel or refueling, and
absolutely never perform such tasks near fire or other open flame. Wait
until the engine has completely cooled before inspecting fuel or refueling.
•
Always be sure to wipe up any spilled fuel or oil.
•
Spilled fuel and oil accumulates in the spill containment. Do not operate
the equipment with liquid accumulated in the spill containment.
Caution: Burn
•
The engine, muffler and similar parts are extremely hot during operation
and immediately after stopping the equipment. Never touch hot parts.
•
Always be sure to stop the engine and allow it to cool before inspecting
or changing the engine oil. Opening the oil gauge or oil plug during
operation will result in hot oil spurting out.
Perform the following maintenance procedures if not using the equipment for two
months or more.
1) Remove the battery.
（
Refer to section "6-6
．
Battery Inspection"
.）
2) Change the engine oil.
（
Refer to section "11
．
(1) Changing the Engine Oil"
.）
3) Drain the fuel from the fuel tank and strainer.
（
Refer to section "11
．
(4) Cleaning/Replacing the Fuel Strainer"
.）
4) Clean and inspect the spill containment.
（
Refer to section "11
．
(8) Cleaning/Inspecting the Spill Containment"
.）
5) Remove the starter key and store in a secure location.
6) Clean all parts and store the equipment in an area with low humidity and little
dust with a cover or similar protection covering it.
<<<<
Note
>>>>
•
Recharge a removed battery approximately once every month.
12. Long-Term Storage