Shindaiwa DGW400DM-C, Руководство владельца и оператора

Страница: 25 / 48

- 22 -
Warning: Suffocation from Exhaust Fume
•
Do not operate the equipment in a poorly-ventilated area such as indoors
or within a tunnel because the engine exhaust fume includes
components that are harmful to humans.
Warning: Fire
•
Keep any ignitable items (such as fuel, gas and paint) or inflammable
items away from the equipment because the muffler, exhaust fume and
other parts attain high temperatures.
•
Provide at least 1 meter (3 feet) of distance between the equipment and
walls and other obstacles, and operate the equipment on a flat surface.
Caution: Suffocation from Exhaust Fume
•
Do not direct the engine exhaust towards passersby, private homes or
similar persons/locations because the engine exhaust fume includes
components that are harmful to humans.
Caution: Burn
•
The engine, muffler and similar parts are extremely hot during operation
and immediately after stopping the equipment. Never touch hot parts.
Caution: Injury
•
Use this equipment with it situated on a stable level surface so that it is
prevented from moving.
•
Do not move the equipment during operation.
•
Always be sure to turn off the switches of all devices using the
equipment and turn off the equipment breakers before starting the
engine.
<<<<
Note
>>>>
•
Check that the surrounding area is safe before starting the engine.
•
When there are multiple workers who are working together, they must mutually
signal each other before starting the engine.
•
Do not use in an area with high temperature or humidity, or an area with a large
amount of dust.
•
Do not open any doors during operation. Operating with a door open can
negatively affect cooling effect, resulting in an equipment malfunction.
•
Use ear protection if the level of noise is high. Failure to do so could result in
hearing damage.
7-1
．
． ．
．
Starting the Engine
1) Turn all breakers (main, 3-P and 1-P) to "OFF".
2) Turn the fuel lever (on the fuel strainer) to "OPEN".
3) Set the idle control switch to "ECO" or "AUTO".
4) If the temperature is 5°C or less, turn the starte r switch to the "PREHEAT"
position and wait until the preheat lamp turns off. (Approx. 5 seconds)
5) Turn the starter switch to the "START" position to start the starter motor,
which then starts the engine.
6) After the engine starts, remove your hand from the starter switch.
7) Allow the engine to warm up for approximately 5 minutes.
7. Operating Procedures