Shimadzu TW223L, Инструкция по эксплуатации, Страница: 7 / 158

7

I want to adjust the balance so that it is very accurate
after stabilization.
Span Calibration and Adjustment page 5

I want to carry out calibration and output a record.
Leaving a Record of Calibration page 67

I want to check the degree of drift in the balance's sensitivity.
Calibration Check page 60
Calibration

I want to send data to a PC (e.g. to Excel).
WindowsDirect Communication Function page 111

After weighing, I want to output automatically upon
stabilization.
Auto Print Function page 10

I want to output data continuously.
Continuous Output Function page 10 8

I want to output data either immediately or after stabilization.
Output Timing Change Function page 129

I want to change the format of the decimal point
(comma or period) in the output data.
Selecting the Decimal Point Display Symbol page 4

I want to add the balance model name,
ID and other information to weight readings.
GLP Output Function page 14
Printing /
output

I want to display weights in units other than g (grams).
Switching Units page 41
Setting the Units page 8

I want the power to turn off automatically when I am
not using the balance.
Auto Power-Off Function page 13 8

I want to go directly into weighing mode when the power is
switched ON.
Setting the Startup Display page 139
Miscellaneous