Shimadzu TW223L, Инструкция по эксплуатации, Страница: 82 / 158

8
7
SETTING UNITS
TW/TX/TXB series balances can be made to indicate weights in units other than the basic units of
grams by switching units with the key in the weighing mode.
You must register the units you will require in advance.
On shipment from the factory, the only unit registered is g (grams) (for the TWC**3L and TXC**3L, it
is g and ct only).
^
"Switching Units", page 41
Units That Can Be Displayed and Conversion Factors
Some of the units below cannot be selected in some countries due to legal restrictions.
Weight Unit (Weight Name) Gram Conversion
(*1)
Conversion Factor
(*2)
g (gram) 1 1
mg (miligram)
*3
0.001 1000
kg (kilogram)
*4
1000 0.001
ct (carat)
*5
0.2 5
mom (momme) 3.75 0.2666667
lb (pound) 453.592 0.00220462
oz (ounce) 28.34955 0.035274
ozt (troy ounce) 31.1035 0.0321507
dwt (pennyweight) 1.55517 0.643015
GN (grain) 0.064799 15.4324
HTl (Hong Kong tael) 37.429 0.0267173
STl (Singapore tael) 37.79936 0.0264554
TTl (Taiwan tael)
*6
37.5 0.0266667
MTl (Malaysian tael) 37.79289 0.0264600
m (mesghal) 4.6083 0.216999
o (parts pound) 0.88592 1.12877
B (baht) 15.2 0.0657895
S (sawaran) 7.999 0.1250156
Ks (kyats) 16.606 0.0602191
T (tola) 11.664 0.0857339
User
*7
Can be set as required by the user
(*7)
*1 If we take the value in the Gram conversion column to be "a", the formula is as follows.
"a" × balance weight reading (each unit) = value in gram units
*2 If we take the conversion factor to be "k", the formula is as follows.
"k" × value in gram units = balance weight value (selected units)
*3 mg cannot be selected on models whose minimum indication is 10 mg or greater.
*4 kg cannot be selected on the TWC**3L and TXC**3L.
*5 The minimum indication for ct (carat) may vary depending on the production lot even if they are the same model.
*6 There are five kinds of Taiwan tael (TTL-1 to TTl-4).
The conversion factor is the same, but the minimum indication is as follows.
TTl-1 A value 5 times that of TTl-2
TTl-2 The minimum value
TTl-3 A value twice that of TTl-2
TTl-4 A value 10 times that of TTl-2
*7 With user-specified units, the conversion factor (*2) and minimum indication can be set as required.
For details on the method for setting user-specified units, see "Setting User-Specified Units" (
^
page 84) .
