Shimadzu TW223L, Инструкция по эксплуатации, Страница: 95 / 158

B
E
FO
R
E
W
E
IG
H
IN
G
M
A
IN
TE
N
A
N
C
E
TR
O
U
BL
ES
H
O
O
TIN
G
FO
R Y
O
U
R
IN
FO
R
M
AT
IO
N
U
S
IN
G T
H
E
B
A
LA
N
C
E
U
S
IN
G M
O
R
E C
O
N
V
E
N
IE
N
TL
Y
95
*
What to do if….
It is not possible to use a reference
weight such that the weight
corresponding to 100% is less than 100
times the minimum indication of the
balance.
Weighing Percentages
1
Establish the percentage weighing
mode.
If you have returned to the weighing mode (mode
where grams or other units are displayed) from
the percentage weighing mode, then pressing
will take you back to the percentage
weighing mode.
*
If the percentage weighing mode
is not established…
The preparations for percentage
weighing have not been completed.
Make setting in accordance with
"Preparation for Percentage Weighing"
(
^
page 92 ) .
2
Place the container on the pan and press
The balance will be tared.
3
Insert the sample (item to be measured) into the container.
A percentage value obtained by conversion based on the set reference percentage value and
reference weight is displayed.
The operations of each of the keys after setting are summarized below.
On pressing ...
The percentage reference value setting menu is displayed. (
^
step
4
onward on pages 93 and 94.)
On pressing ...
The set reference weight (in grams) and the percentage indication are
displayed alternately. Press while the reference weight is displayed to
output the reference weight. While the reference weight is displayed, (the
hold display symbol) is displayed.
On pressing
for about 3 seconds…
The 100% reference and specific percentage value are displayed alternately.
On pressing ...
The mode is switched to the weighing mode.
Pressing the key again will return you to the percentage weighing mode.

! !1!0!0.0!0
The percentage weighing symbol
lights up.
! !1!0!0.0!0
The percentage weighing symbol
lights up.