Shimadzu TW223L Скачать руководство пользователя страница 9

Страница: 9 / 158

Precautions on Use

Prohibitions

Avoid locations where the balance

will be exposed to any of the

following.

You may not be able to obtain correct weight

readings.

Air flow from an air conditioner, ventilator,

door or window
Extreme temperature changes
Vibration
Direct sunlight
Dust, electromagnetic waves or a magnetic

field

•

•
•
•
•

Instructions

Treat the balance with care and respect.

The balance is a precision instrument. Subjecting it to

impacts could cause it to fail.
When moving the balance, remove pan and pan

supporter. Grasp it firmly with both hands to carry it.

If the balance has to be stored for a long time, store it in

the packaging box in which it was delivered.

Instructions

Install the balance on a

strong and stable flat table

or floor.

Placing the balance in an unstable site

could lead to injury or trouble with

the balance.
When selecting the installation site,

take into account the combined

weight of the balance and the item to

be weighed.

Instructions

Use the correct weighing units.

Using incorrect weighing units can lead to accidents as

a result of weighing errors.

Check that the weighing units are correct before

starting weighing.

Instructions

After a power outage, turn

the power back ON.

When a power outage occurs, the

power is shut off automatically.

Therefore, begin operation from

"Turning the Power ON" (

page

)

again.

Содержание TW223L































































































































































Результаты поиска

Содержание TW223L

Отзывы:

Shimadzu TW223L, Инструкция по эксплуатации, Страница: 9 / 158

Результаты поиска

Содержание TW223L

Отзывы: