Shimadzu TW223L, Инструкция по эксплуатации, Страница: 33 / 158

U
S
IN
G T
H
E
B
A
LA
N
C
E
U
S
IN
G M
O
R
E C
O
N
V
E
N
IE
N
TL
Y
M
A
IN
TE
N
A
N
C
E
TR
O
U
BL
ES
H
O
O
TIN
G
FO
R Y
O
U
R
IN
FO
R
M
AT
IO
N
B
E
FO
R
E
W
E
IG
H
IN
G
Continued on next page

6
Press
The whole display will light up momentarily, then the gram display will be shown.
If (the battery symbol) lights up at this point, the probable cause is that the battery voltage is
low.
Replace the batteries with new ones.
*
If you are not going to use the balance for a long time (a month or longer)…
In order to prevent damage by liquid leakage from the batteries, remove them from the battery
compartment.
^
"Turning the Power OFF", page 43
Warming Up
Before performing span calibration on the balance or measuring its accuracy, you must ensure
that it is in a stable state.
When stabilizing the balance, it is important that its temperature is stable.
Put the balance in weighing mode (for example showing the gram display) and leave it with
the power ON for at least an hour (two hours for the carat models TWC**3L and TXC**3L) in
advance of calibration.
This is called "warming up".
With the TW/TX Series…
Warming up is also accomplished in the standby mode.
For details on the standby mode, see
"Turning the Power OFF" (
^
page 43 ) .
(* The standby mode is a function available with the TW/TX Series only. It is not featured on the
TXB series.)
With the TXB Series…
When the auto power-off function operates, the power is shut off completely.
Before warming up for calibration, cancel the auto power-off function so that it cannot operate.
For details on the auto power-off function, see
"Auto Power-Off Function" (
^
page 138) .
