Shimadzu TW223L, Инструкция по эксплуатации, Страница: 52 / 158

Convenient Functions for Menu Setting 
3
MENU SETTINGS
Prohibiting Changes to the Menu Settings (Menu Lock)
In order to ensure that the menu settings are not changed by mistake, the person managing the
balance controls the password and can prohibit menu operation.
The default password is "9999". To change the password, see
"Changing the Password"
(
^
page 141 ) .
*
Operation in the menu lock status
Even when the menu is locked it is possible to perform calibration ( ), change the weight
value, and switch the weighing mode and application function mode ( ).
1
Press until the display
changes (about three seconds)
while "OFF" is displayed after
supplying power or while in the
standby mode.
*
With the TXB series the balance
doesn't go into the standby mode.
If the "OFF" display doesn't appear, see
"Setting the Startup Display"
(
^
page 139 ) .
2
Enter the password.
^
"Entering Numerical Values", page 49
3
Press
The password will be accepted.
The menu will be locked and the display will
return to the indication in step
1
.
If the password is wrong…
The error message shown to the right will be
displayed and the display will return to the
indication in step
1
.
4
Confirm.
On entering the weighing mode…
(the menu lock symbol) is shown in the
display.
On pressing any menu operation key…
"LOCKED" is displayed and menu operation is
not possible.

OFF display after supplying power
! !O!F!F
•
Standby mode
•
OFF display after supplying power
! !O!F!F
•
Standby mode
•
!P!-!0!0!0!0
/
/
/
/
//
//
/
/
/
/ /
/
!P!-!0!0!0!0
/
/
/
/
//
//
/
/
/
/ /
/
! !L!O!C!K
The menu lock symbol will light up.
! !L!O!C!K
The menu lock symbol will light up.
! !E!R!R! !N ! !E!R!R! !N
! ! !0!0!0!0 ! ! !0!0!0!0
!L!O!C!K!E!D !L!O!C!K!E!D