Shimadzu TW223L, Инструкция по эксплуатации, Страница: 106 / 158

106
10
CONNECTION AND COMMUNICATION
WITH PERIPHERAL DEVICES
With TW/TX/TXB series balances, weight readings, settings and other data can be output to a personal
computer or a printer.
This section describes some convenient functions relating to output, and how to connect the balance to
a PC or printer (option).
Printing / Outputting Automatically (Auto Print Function)
This function allows you to automatically output the displayed weight reading at each weighing
without pressing
Select the output timing from among the following five modes.
Stable
Positive
Value
Stable
Negative
Value
Stable
Zero
Indication
Pass in
Checkweighing
Mode
Explanation
Mode 1
L!D.! ! .
When stability is detected with a
positive value, the value is output.
Mode 2
L!D.U!L.
When stability is detected with
a positive or negative value, the
value is output.
Mode 3
L!D. ! .Z
When stability is detected with a
positive value, or when the reading
has returned to zero, the value is
output.
Mode 4
L!D.U!L.Z
When stability is detected with a
positive or negative value or when
the reading has returned to zero,
the value is output.
Mode 5
L!D.O!K.
When the auto print function
is used in combination with the
checkweighing mode (
^
page
104 ) and stability is detected with
an "OK" determination, the value
is output.
: Output, Blank: Not output
1
Press for about
3 seconds in the weighing mode.
This opens the output menu.

Convenient
Functions Relating
to Output