35
9. Display Settings
9. Display Settings
9.1 Bar Graph Display
This function displays a bar graph representation of the load on the pan. This may be used to prevent
sudden appearance of “oL” (overload) during measurement. This bar graph display can be turned on
or off.
Setting ON/OFF
1
Press the
[CAL]
key repeatedly from the mass
display and when “Func.SEL” appears, press the
[O/T]
key. “CAL” is displayed.
2
Press the
[CAL]
key repeatedly unit “AdiSP:
∗∗
”
appears. The
∗∗
position displays the current set-
ting “on” or “oF”.
3
Press the
[O/T]
key. “Ad-on” is displayed. At
this point, pressing the
[CAL]
key switches the
display between “Ad-on” and “Ad-oF”. When the
current setting is displayed, the stability mark
(
) appears. To change the setting, press the
[O/T]
key when the desired setting appears, and
the display will return to “AdiSP:
∗∗
”, indicating the
new setting.
4
If no change is required, press the
[POWER]
key. The display returns to “AdiSP:
∗∗
”.
5
Press the
[POWER]
key repeatedly to return to
the mass display.
Bar graph in weighing
...
...
(Example)
(Example)
(Example)
(When OFF)
(Example)
(When ON)
During
setting
(When ON)
(When ON)
During
setting
Setting
check
Setting
check
(Example)
(When about one third
of the capacity is used)
