32
8. Setting the Built-in Clock (AUW-D/AUW/AUX series only)
8. Setting the Built-in Clock
(AUW-D/AUW/AUX series only)
AUW-D/AUW/AUX series are installed with a built-in clock. Set the clock before use of Clock-CAL
(
) or Calibration report (
) functions. Note that the current time is displayed during STAND-
BY mode (
8.1 Date
1
From the mass display, press the
[CAL]
key
repeatedly until “SEttinG” appears, press the
[O/T]
key. “CAL dEF” will appear.
2
Press the
[CAL]
key repeatedly until “d-
MM.DD” appears (MM and DD are each two digits
representing month and date, respectively), and
press the
[O/T]
key. In the upper part of the dis-
play, the
mark and the
symbol appear
indicating number entry mode. Also, the current
date setting appears as [YY.MM.DD] (YY is the
year) with the leftmost digit blinking.
3
Pressing the
[UNIT]
key increases the blinking
digit by one. Pressing the
[PRINT]
key moves the
blinking digit one place to the right.
4
Press the
[O/T]
key when the desired date is
shown in the display. The built-in clock will be set.
5
Press the
[POWER]
key repeatedly to return to
the mass display.
(Example)
(Example)
(Example)
(Nov.2, 2004)
(Mar.15, 2003)
(Mar.15)
Note
The actually outputted date format is not the same as the display during
this setting. Select your desirable style of expressing year, month and date
in
8.2
.
