12
4. Installation
For Basic Operation
4.4 Turning On the Power
1
Insert the AC adapter plug in to the DC IN con-
nector on the back of the balance. Place the AC
adapter cable as shown in figure and hold it with
the adapter cable holder.
2
Plug the AC adapter to the power outlet. After
the balance performs a self check, calibration will
be automatically executed. During this process,
the display will change as follows. “CHE 5”, “CHE
4” ...... “CHE 0”, “*.**-*.**”, “CAL 2”, “CAL 1”, “CAL
0”, “CALEnd”, “oFF” (This span calibration imme-
diately after power up can be aborted by pressing
the [POWER] key, however at least one span cali-
bration is necessary before use. The AUY series
does not perform calibration and the display
showing “CAL...” will not appear.)
“*.**-*.**” shows version number of software.
3
Press the
[POWER]
key. After all displays
appear, the gram (g) display appears. Also, the
display backlight illuminates (AUW series only).
4
Pressing the
[POWER]
key again turns on the
standby symbol and puts the balance in standby
(warm up) status. (For AUW-D/AUW/AUX series,
the current time is displayed according to the
built-in clock settings in 8. For the AUW series,
the backlight will turn off.)
Note
A power cable may be necessary to connect
the AC adapter to the power source, depend-
ing on the type of the AC adapter
.
Clip
AC Ad
apter
Ba
l
ance
P
o
w
er
S
o
u
rce
P
o
w
er
ca
bl
e
