54
10. Calibration
10.4.3 Date Printout Setting
This setting determines whether or not the date and time on the balance’s built-in clock is printed out
along with the calibration report.
1
From mass display, press the
[CAL]
key
repeatedly until “SEttinG” appears. Press the
[O/T]
key. “CAL dEF” appears.
2
Press the
[CAL]
key repeatedly until “Prtdt:
∗∗
”
appears. The
∗∗
positions show the current set-
ting, “on” when set (print) and “oF” when unset
(do not print).
3
To change the setting, press the
[O/T]
key
when “Prtdt:
∗∗
” is showing. The display will show
“Prdt-on”. (The “:” becomes “-”)
4
From this point, every time the
[CAL]
key is
pressed, the display will switch between “Prdt-oF”
and “Prdt-on”. Here, when the current setting is
displayed, the stability mark (
) appears.
5
To change the setting, press the
[O/T]
key
when the desired setting appears, or
6
Press the
[POWER]
key to return to “Prtdt:
∗∗
”
without changing the setting.
7
Press the
[POWER]
key again to return to the
mass display.
(When OFF)
(Example)
(When ON)
(Example)
(Example)
(When ON)
(When OFF)
(Example)
Setting
check
During
setting
During
setting
Setting
check
