Sharp FO 4400 - B/W Laser - All-in-One, Руководство по обслуживанию

Страница: 51 / 190

FO-4400U
FO-CS1
2 – 37
2. Service call error massage
REMOVE ORIGINAL (S) Document is stuck at the auto-feeder.
NO PAPER (TRAY) No recording paper on the tray.
NO PAPER (UPPER) No recording paper in the upper cassette.
NO PAPER (LOWER) No recording paper in the lower cassette.
NO PAPER (BOTH CASS.) No recording paper in either cassette.
NO PAPER (TRAY, UPPER) No recording paper in the tray nor in the upper cassette.
NO PAPER (TRAY, LOWER) No recording paper in the tray nor in the lower cassette.
NO PAPER No recording paper anywhere.
SIZE ERROR The size of the recording paper is wrong.
LASER ERROR The laser unit abnormal.
POLYGON ERROR The polygon motor abnormal.
FAN MOTOR ERROR The fan motor abnormal.
CHECK UPPER CASSETTE The upper cassette is not set properly.
CHECK LOWER CASSETTE The lower cassette is not set properly.
CHECK BOTH CASSETTES Neither cassette is set properly.
TONER EMPTY There is no toner left.
PCU COMM. ERROR No data communication between the PCU and the control PWB.
RX DOCUMENT TRAY OFF The document-receiving tray is not set properly.
HIGH VOLTAGE ERROR Abnormality with the high-voltage portion.
HEATER LOW ERROR Heater temperature is too low.
HEATER HIGH ERROR Heater temperature is too high.
WARMING UP ERROR Warming up is not done properly.
CHECK COVER OR DRUM Printer cover may be open, or the drum cartridge may not be set properly.
DRUM LIFE OVER Drum life is over.
PAPER JAM Recording paper is stuck inside.
Message Description
Super G3 mode
<Reference> Details of E-29 ~ 31
Error Code Transmission Errors Reception Errors
E-16 Same as E-0 Same as E-0
E-17 Same as E-1 Same as E-1
E-18 Same as E-2 Same as E-2
E-19 - Same as E-8
E-20 Same as E-4 Same as E-9
E-21 - Same as E-10
E-22 - -
E-23 Same as E-7 Same as E-7
E-24 Same as E-8 -
E-25 Same as E-11 Same as E-11
E-26 Same as E-12 Same as E-12
E-27 Same as E-13 Same as E-13
E-28 - Same as E-14
E-29
E-30
Error occurred during handshaking for super G3 mode
E-31
E-29 Handshaking error in V.8 negotiation procedure
E-30 Handshaking error in V.34 line probing procedure
E-31 Handshaking error in V.34 HDX training procedure