SEW-Eurodrive MOVIGEAR DAC B, Руководство по эксплуатации

Страница: 9 / 258

Operating Instructions – MOVIGEAR® DAC-B
9
2
Designated use
Safety Notes
2.3 Designated use
MOVIGEAR
®
drive units are components intended for installation in electrical systems
or machines.
In case of installation in machines, startup of the MOVIGEAR
®
drive units (i.e. start of
designated operation) is prohibited until it is determined that the machine meets the
requirements stipulated in the EC Directive 2006/42/EC (machine directive).
Startup (i.e. the start of designated use) is only permitted under observance of the
EMC (2004/108/EC) directive.
MOVIGEAR
®
drive units comply with the regulations of the Low Voltage Directive 2006/
95/EC. The standards given in the declaration of conformity are applied to the
MOVIGEAR
®
drive units.
You must observe the technical data and information on the connection requirements
as provided on the nameplate and in the documentation.
2.3.1 Safety functions
The MOVIGEAR
®
drive units may not perform safety functions unless these functions
are described and expressly permitted.
2.3.2 Hoist applications
MOVIGEAR
®
drive units must not be used for hoist applications.
MOVIGEAR
®
drive units may only be used for inclining tracks after the operator has
performed a risk assessment. For further information, consult the information in the
documentation.
2.4 Transportation and storage
You must observe the notes in the documentation regarding transportation, storage and
proper handling. Use suitable, sufficiently rated handling equipment (e.g. rope guides)
if required. Do not attach any additional loads. Observe climatic conditions in accor-
dance with the documentation.
The following figure shows the eyebolt of MOVIGEAR
®
:
2770620811