SEW-Eurodrive MOVIGEAR DAC B, Руководство по эксплуатации

Страница: 205 / 258

Operating Instructions – MOVIGEAR® DAC-B
205
13
Technical data of MOVIGEAR
®
Technical Data and Dimension Sheets
13 Technical Data and Dimension Sheets
13.1 Technical data of MOVIGEAR
®
13.1.1 General technical data
13.1.2 Ambient temperature
MOVIGEAR
®
type MGF..2 MGF..4 MGF..4/ET
Torque class M 200 Nm 400 Nm
Supply voltages
Permitted range V
line
3 x AC 380 V - 5 % to AC 500 V + 10 %
Line frequency f
line
50 Hz ... 60 Hz
Input current I
N
1.52 A
(n
Motor
= 2000 rpm)
2.72 A
(n
Motor
= 2000 rpm)
3.2 A
(n
Motor
= 2000 rpm)
I
maxStart
2.45 A 3.15 A 3.7 A
PWM frequency 4/8 kHz
Interference immunity EN 61800-3; 2nd environment (industrial environment)
Interference emission EN 61800-3 category C3 (class A group 2 of EN 55011)
Climate class EN 60721-3-3, class 3K3
Storage temperature ϑ
L
− 25 °C to + 70 °C (EN 60721-3-3)
Proof of mechanical strength according to EN 61800-5-1
Degree of protection IP Standard: IP 65 to EN 60529
(MOVIGEAR
®
housing closed and all cable glands sealed off. Possible
restrictions regarding application options)
With optional package for applications in wet areas: IP 66 to EN 60529
(MOVIGEAR
®
housing closed and all cable glands sealed off. Application
options not permitted for this drive package)
Duty cycle S1, continuous (EN 60149-1-1 and 1-3)
Type of cooling Self-cooling to DIN 41751 and EN 61800-5-1
Signaling functions Display elements on housing to indicate the unit state
Installation altitude h Up to h ≤ 1000 m without restrictions.
The following restrictions apply to heights ≥ 1000:
• From 1000 m to max. 4000 m:
–
I
N
reduction by 1% per 100 m
• From 2000 m to max. 4000 m:
–
U
N
reduction by AC 6 V per 100 m
Over 2000 m only overvoltage class 2; external measures are required for
overvoltage class 3. Overvoltage classes according to DIN VDE 0110-1.
Required preventive measures Ground the unit
MOVIGEAR
®
type MGF..2 MGF..4 MGF..4/ET
Ambient temperature
I
N
reduction
Ambient temperature
ϑ
A
– 25 °C to + 60 °C
1)
3 % I
N
per K at 40 °C to 60 °C
1) Observe the permitted temperature range of the oil to be used (see chapter "Lubricant table").
P
i
f
kVA
Hz
n