SEW-Eurodrive MOVIGEAR DAC B, Руководство по эксплуатации

Страница: 60 / 258

60
Operating Instructions – MOVIGEAR® DAC-B
5
Terminal assignment
Electrical Installation
5.3 Terminal assignment
The following figure shows the terminal assignment of MOVIGEAR
®
DAC:
DANGER
The drive is operated as a generator when the hollow shaft is turned.
Severe or fatal injuries from electric shock.
• Secure the output shaft against rotation when the electronics cover is removed.
2370851211
Assignment
Terminal No. Name Color Function (permitted tightening torque)
Supply
system
terminals – L1 Brown Line connection phase L1 (1.2 to 1.4 Nm)
– L2 Black Line connection phase L2 (1.2 to 1.4 Nm)
– L3 Gray Line connection phase L3 (1.2 to 1.4 Nm)
– PE – Protective earth connection (2.0 to 3.3 Nm )
Control
terminals 1 STO+ Yellow Input STO+
2 STO − Yellow Input STO –
3 K1a – Signal relay
4 DI01 – Binary input DI01
5 DI03 – Binary input DI03
6 24V_O – DC 24 V output
7 0V24_O – 0V24 reference potential output
11 STO+ Yellow Output STO + (to loop through)
12 STO − Yellow Output STO – (to loop through)
13 K1b – Signal relay
14 DI02 – Binary input DI02
15 DI04 – Binary input DI04
16 24V_O – DC 24 V output
17 0V24_O – 0V24 reference potential output
PE PE
L1 L2 L3
PE PE
1
11 12 13 14 15 16 17
2 3 4 5 6 7
AS+ AS−
DI2
DI3
V024 V024
V0
V0