Sencore VB330, Руководство пользователя

Страница: 81 / 203

General
Name: A name should be assigned to each unicast/multicast. The name will be
used throughout the VB330 user interface when referring to this stream. It
may also be used by an external management system like the VideoBRIDGE
Controller.
Address: The IP address of the unicast or multicast. For a T2MI inner stream enter a
dummy address.
Port: The port number of the unicast or multicast. For a T2MI inner stream enter a
dummy port number.
Ethernet thresholds: The Ethernet thresholds specify various error limits. Selectable Ethernet
thresholds templates are defined in the Multicasts — Ethernet thresh. view.
For a T2MI stream select a dummy threshold template.
VBC thresholds: The VBC thresholds specify various error limits to be used by VideoBRIDGE
Controller to generate alarms. These thresholds are only relevant if the
VideoBRIDGE Controller is used. VBC threshold templates are defined in
the Setup — VBC thresh. view.
Join stream: Check the ‘Join stream’ check box to join a multicast or unicast. Only joined
streams are analyzed. A stream may also be joined from the
Multicasts —
Join or Multicasts — Streams views, and the status of this check box will
be updated accordingly.
Join interface: Select which interface to join the selected multicast. The data interface(s) are
listed as well as any enabled VLAN interface (defined in
Setup — VLANs ).
Page: For easy navigation, each stream can be assigned a specific page. The
names of the pages are defined in
Setup — Pages .
VB3xx 10G Probe User’s Manual version 5.3 81