Sencore VB330, Руководство пользователя

Страница: 198 / 203

E Appendix: Software Upload
The process of performing a software upload to the probe involves the following steps:
1. Obtain the software image.
2. Export and save the probe configuration.
3. Delete any existing probe stream recordings.
4. Transfer the image to the probe using the software upload functionality in the Data — Software
view or by using ftp, and save the image to flash.
5. Wait while the software is being saved.
6. Verify the new image.
E.1 Obtain the software image
The image will have a
.tea
extension.
The version number, build date and possibly hardware version is usually also part of the file name.
E.2 Export and save the probe configuration
Software upgrade should not alter the probe configuration, however for safety is is a good idea to export
the probe configuration (from the
Data — Configuration view) and save it to a file. Please refer to
chapter 6.11.1.
E.3 Delete any existing probe stream recordings
If any stream recordings is stored on the probe, this may prevent software upgrade, as there might not be
enough internal disk space available for the software image upload to be possible. Therefore delete any
recordings prior to software upload – this is done in the
RDP — Control view.
198 VB3xx 10G Probe User’s Manual version 5.3