Sencore VB330, Руководство пользователя

Страница: 127 / 203

Start RF idx: The starting RF index.
Frame idx: The frame index.
Sub slice interval:
The interval between sub slices.
Type 2 start: The value of the type 2 start parameter.
Regen flag: The value of the regen flag.
PLP (Physical Layer Pipes) information:
Current PLP: The PLP currently being received. If a specific PLP was configured the interface
settings T2MI extraction ( Multicasts — Streams ), this will be used. If auto mode
is used the first PLP detected will be used.
Detected PLPs: The detected PLP ids in the T2MI stream. In some error situations this may differ
from the list of Signaled PLPs show below.
Signaled PLPs: Lists the PLPs signaled in the stream.
PLP type:
The signaled type of the PLP. Data PLP Type 1 is the most common, some signals
can have a common PLP as well as well as other PLP types.
Payload: Payload type of this PLP. Will typically be the Transport Stream format
PLP Group: The group signaled for this PLP. The PLPs in a group shares one common PLP
and when analyzing a PLP both the data in the specified PLP and the common
PLP in the same group (if present) are extracted. The PLP contains PIDs which are
shared such as PAT, SDT, NIT, CAT and EMMs. In the example above , analyzing
PLP 0 will also analyze PLP 2.
Code: The FEC coding scheme used for this PLP.
Modulation: Modulation for the the PLP.
Rotation:
Specifies if IQ rotation is enabled.
FEC: Specifies the FEC coding type for this PLP.
Clicking the blue information symbol in the PLP list will bring up more detailed information for that PLP.
VB3xx 10G Probe User’s Manual version 5.3 127