Sencore VB330, Руководство пользователя

Страница: 168 / 203

6.10.5.4 Example 3 – Mixed Mode IPv4
This model is similar to the separate management model with the difference that a web server is also run
on the data/video management.
Since there is only one default gateway, in this case pointing to the management network, clients
accessing the probe via the data/video interface need to be on the same subnet as the probe’s data/video
interface.
Parameter Management
(eth1)
Data/video
(eth0)
Explanation
Enable
management Yes Yes Run web server on both interfaces
The other settings are the same as in example 1
The principles shown in the previous examples also apply for IPv6 management. IPv4 and IPv6 can be
used simultaneously. In theory the probe’s web server can be accessed using four different IP addresses,
provided that the network architecture allows it.
6.10.6 Setup — VLANs
The VB330 probe supports a large number of VLAN interfaces. The VLAN interfaces can be associated
with any of the physical interfaces. Once enabled, these VLAN interfaces can be used for routing and
joining of multicasts.
The VLAN interface can be used to monitor OTT traffic – also if it is associated with the management
interface. Multicasts can be joined from any of the VLANs, as long as the VLAN belongs to one of the
two physical SFP+ interfaces. The VLAN interfaces are not available for serving the web interfaces.
Edit VLANs
Enable: Once enabled the virtual interfaces are created and available.
168 VB3xx 10G Probe User’s Manual version 5.3