manualshive.com logo in svg

Sel 421, Инструкция по эксплуатации

Радио Flyer 421 - классический детский самокат с ручным тормозом. Получите подробное руководство пользователя бесплатно, скачав его с {веб-сайт}. Инструкция поможет вам правильно собрать и использовать этот замечательный самокат для вашего малыша.

Поделиться
Скачать
background image

xxxvii

Date Code 20090715

SEL-421 Relay

Preface

SEL-421 Cautions, Warnings, and Dangers

SEL-421 Cautions, Warnings, and Dangers

The following hazard statements appear in the body of this manual in English. 
See the following table for the English and French translation of these 
statements.

English

French

!

CAUTION

!

CAUTION

Equipment components are sensitive to electrostatic discharge (ESD). 
Undetectable permanent damage can result if you do not use proper 
ESD procedures. Ground yourself, your work surface, and this 
equipment before removing any cover from this equipment. If your 
facility is not equipped to work with these components, contact SEL 
about returning this device and related SEL equipment for service.

!

ATTENTION

Les composants de cet équipement sont sensibles aux décharges 
électrostatiques (DES). Des dommages permanents non-décelables 
peuvent résulter de l’absence de précautions contre les DES. 
Raccordez-vous correctement à la terre, ainsi que la surface de travail 
et l’appareil avant d’en retirer un panneau. Si vous n’êtes pas équipés 
pour travailler avec ce type de composants, contacter SEL afin de 
retourner l’appareil pour un service en usine.

!

CAUTION

!

CAUTION

There is danger of explosion if the battery is incorrectly replaced. 
Replace only with Ray-O-Vac

®

 no. BR2335 or equivalent 

recommended by manufacturer. Dispose of used batteries according 
to the manufacturer’s instructions.

!

ATTENTION

Il y a un danger d’explosion si la pile électrique n’est pas correctement 
remplacée. Utiliser exclusivement Ray-O-Vac

®

 No. BR2335 ou un 

équivalent recommandé par le fabricant. Se débarrasser des piles 
usagées suivant les instructions du fabricant.

!

CAUTION

!

CAUTION

Equipment damage can result from connecting ac circuits to Hybrid 
(high-current-interrupting) control outputs. Do not connect ac circuits 
to Hybrid control outputs. Use only dc circuits with Hybrid control 
outputs.

!

ATTENTION

Des dommages à l’appareil pourraient survenir si un circuit CA était 
raccordé aux contacts de sortie à haut pouvoir de coupure de type 
“Hybrid.” Ne pas raccorder de circuit CA aux contacts de sortie de 
type “Hybrid.” Utiliser uniquement du CC avec les contacts de sortie 
de type “Hybrid.”

!

CAUTION

!

CAUTION

Substation battery systems that have either a high resistance to 
ground (greater than 10 k

Ω

) or are ungrounded when used in 

conjunction with many direct-coupled inputs can reflect a dc voltage 
offset between battery rails. Similar conditions can exist for battery 
monitoring systems that have high-resistance balancing circuits or 
floating grounds. For these applications, SEL provides optional 
ground-isolated (optoisolated) contact inputs. In addition, SEL has 
published an application advisory on this issue. Contact the factory for 
more information.

!

ATTENTION

Les circuits de batterie de postes qui présentent une haute résistance 
à la terre (plus grande que 10 k

Ω

) ou sont isolés peuvent présenter un 

biais de tension CC entre les deux polarités de la batterie quand 
utilisés avec plusieurs entrées à couplage direct. Des conditions 
similaires peuvent exister pour des systèmes de surveillance de 
batterie qui utilisent des circuits d’équilibrage à haute résistance ou 
des masses flottantes. Pour ce type d’applications, SEL peut fournir 
en option des contacts d’entrée isolés (par couplage 
optoélectronique). De surcroît, SEL a publié des recommandations 
relativement à cette application. Contacter l’usine pour plus 
d’informations.

!

CAUTION

!

CAUTION

If you are planning to install an INT4 I/O Interface Board in your relay 
(see 

Table 2.3

 and 

Table 2.4

 for board descriptions), first check the 

firmware version of the relay—see 

Firmware Version Number on 

page U.6.39

. If the firmware version is R111 or lower, you must first 

upgrade the relay firmware to the newest version and verify that the 
firmware upgrade was successful before installing the new board. 
Failure to install the new firmware first will cause the I/O Interface 
Board to fail, and it may require factory service. Complete firmware 
upgrade instructions are provided when new firmware is ordered.

!

ATTENTION

Si vous avez l’intention d’installer une Carte d’Interface INT4 I/O dans 
votre relais (voit 

Table 2.3

 et 

Table 2.4

 pour la description de la carte), 

vérifiez en premier la version du logiciel du relais (voir l’indentification 
de la Version du logiciel [

Firmware Version Number on page U.6.39

]). 

Si la version est R111 ou antérieure, vous devez mettre à jour le logiciel 
du relais avec la version la plus récente et vérifier que la mise à jour a 
été correctement installée sur la nouvelle carte. Les instructions 
complètes de mise à jour sont fournies quand le nouveau logiciel est 
commandé.

!

CAUTION

!

CAUTION

Field replacement of I/O boards INT1, INT2, INT5, INT6, INT7, or INT8 
with INT4 can cause I/O contact failure. The INT4 board has a pickup 
and dropout delay setting range of 0–1 cycle. For all other I/O boards, 
pickup and dropout delay settings (IN201PU–IN224PU, IN201DO–
IN224DO, IN301PU–IN324PU, and IN301DO–IN324DO) have a range of 
0–5 cycles. Upon replacing any I/O board with an INT4 board, manually 
confirm reset of pickup and dropout delays to within the expected 
range of 0–1 cycle.

!

ATTENTION

Le remplacement en chantier des cartes d’entrées/sorties INT1, INT2, 
INT5, INT6, INT7 ou INT8 par une carte INT4 peut causer la défaillance 
du contact d’entrée/sortie. La carte INT4 présente un intervalle 
d’ajustement pour les délais de montée et de retombée de 0 à 1 cycle. 
Pour toutes les autres cartes, l’intervalle de réglage du délai de 
montée et retombée (IN201PU–IN224PU, IN201DO– IN224DO, 
IN301PU–IN324PU, et IN301DO–IN324DO) est de 0 à 5 cycles. Quand 
une carte d’entrées/sorties est remplacée par une carte INT4, vérifier 
manuellement que les délais de montée et retombée sont dans 
l’intervalle de 0 à 1 cycle.

Courtesy of NationalSwitchgear.com

Содержание 421



















































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 421

Omicron CMC 356 Reference Manual preview
CMC 356
Бренд: Omicron Страницы: 114
finder 10.32.8.230 Quick Start Manual preview
10.32.8.230
Бренд: finder Страницы: 2
C&S CSDPR-V2-300 Quick Reference Manual preview
CSDPR-V2-300
Бренд: C&S Страницы: 16
ECTIVE IR 140 Installation And Operating Instructions Manual preview
IR 140
Бренд: ECTIVE Страницы: 12
Vimar 0170/001 Quick Start Manual preview
0170/001
Бренд: Vimar Страницы: 2
Tektronix 73A-308 User Manual preview
73A-308
Бренд: Tektronix Страницы: 80
enphase NPR-3P-208-NA Quick Install Manual preview
NPR-3P-208-NA
Бренд: enphase Страницы: 8
ABB Relion 615 series Applications Manual preview
Relion 615 series
Бренд: ABB Страницы: 156
IDEC HR1S-ATE Manual preview
HR1S-ATE
Бренд: IDEC Страницы: 3
IFM BasicController CR0431 Programming Manual preview
BasicController CR0431
Бренд: IFM Страницы: 228
GE D30D00HCHF8AH6AM6BP8BX7A Instruction Manual preview
D30D00HCHF8AH6AM6BP8BX7A
Бренд: GE Страницы: 646
Eaton Funke+Huster Fernsig TAR22 Manual preview
Funke+Huster Fernsig TAR22
Бренд: Eaton Страницы: 8
GE MLJ1000 Manual preview
MLJ1000
Бренд: GE Страницы: 42
GE IAC57A Instructions Manual preview
IAC57A
Бренд: GE Страницы: 18
MULTISPAN ELR-63 Quick Start Manual preview
ELR-63
Бренд: MULTISPAN Страницы: 4
Omron MYK Datasheet preview
MYK
Бренд: Omron Страницы: 4
Omron MY4H Datasheet preview
MY4H
Бренд: Omron Страницы: 4
Omron MY - Datasheet preview
MY -
Бренд: Omron Страницы: 16

Бренды по названию

Популярные бренды

Загрузить еще бренды