Sea Tel ST14, Руководство по установке и обслуживанию, Страница: 8 / 84

Installation ST14 Ku-Band TVRO
1-2
1.2. Determine your Cables
In addition to the required Coaxial cable that will interconnect the above decks equipment with the below decks
equipment, you will need to determine what cables are going to be used to interconnect satellite receivers to the
televisions and if installed the surround sound system. The below guide may be used to help determine which cable
type is best suited for your installation. You should also refer to the manual of the CFE equipment for additional
guidance.
Video
Connection
Reference Audio Connection Reference:
OK:
Composite Video
(Non-HD Video Only)
Typically an RCA Jack, this type
of connection combines and
transmits chrominance and
luminance information on a
single cable.
OK: Stereo RCA (2 channel Analog)
These RCA Jack connections are a means of
passing analog line-level audio signals (split
into left and right channels) from the
satellite receiver to your television or audio
amplifier.
Good: S-Video (Non HD Video Only)
S-video connections transmit
the chrominance (color) and
luminance (brightness) portions
of a video signal along different
paths, allowing them to be
processed separately.
Good:
RCA
(Multi-Channel Analog)
These preamp-level analog inputs
features jacks for up to 8 channels:
left front, right front, center channel,
left surround, right surround, and
subwoofer. Because the subwoofer
channel carries a limited range of frequencies, it's the
".1" in 5.1. A 6.1 input features the same jacks as a 5.1
input, but adds a back surround jack. A 7.1 input adds
two back surround jacks.
Better:
Component
(HD Video Only )
This 3-cable connection allows the
chrominance (color) and luminance
(brightness) portions of a video
signal to be processed separately
.S-Video works similarly, but
component video improves color
accuracy further by splitting the chrominance
signal into two portions.
Better:
XLR
(Hi Resolution Analog)
XLR audio
connections are
used primarily
with high-performance audio gear. This 3 pin
connector dedicates one of these pins for ground
which helps reduce electronic noise throughout the
cable. A clasp built into the round XLR plug locks it
tightly into the socket, ensuring a secure connection
even during full ships motion.
Best:
HDMI
(Both HD Video and Digital Audio)
HDMI is a multi-pin connection used for passing standard- and high-definition
digital video signals, as well as up to 8 discrete digital audio channels, through a
single cable.