Sea Tel ST14, Руководство по установке и обслуживанию

Страница: 24 / 84

Setup for Model ST14 D ST14 Ku-Band TVRO
2-4
2.3.5.
Access all of the SAT1 individual parameters via a sub menu. Choices are:
SAT1 - First Satellite Parameters
2.3.5.1. PRESET
This choice presets all of the other sub-menu parameters to factory defaults for the satellite you
choose to set this SAT to.
1. Press the NEXT key to select this parameter for adjustment.
2. Once selected, press
▼
&
▲
arrow keys to scroll through a list of choices which this SAT
can be preset to. This list may change in future software revisions. The current choices
are:
Empty Blanks/zeroes all parameters for this satellite, so switching satellites
(NEXT) will skip over the satellites you don’t want ( if you only use
ONE satellite, you should preset all of the other SAT selections to
be empty/blank
).
ExpV82 Bell ExpressVu @ 82W
ExpV91 Bell ExpressVu @ 91W
DTV 72 DirecTV @ 72W
DTV101 DirecTV @ 101W
DTV110 DirecTV @ 110.1W
DTV119 DirecTV @ 119W
Dish61 Dish Network @ 61W
Dish73 Dish Network @ 73W
Dish77 Dish Network @ 77W
Dsh110 Dish Network @ 110W
Dsh119 Dish Network @ 119W
Dsh129 Dish Network @ 129W
Dsh148 Dish Network @ 148W
3. When the desired choice is displayed, press the SAVE key to save the parameters for this
SAT. This saves the DEFAULT Satellite Name, Satellite Longitude, RHCP frequency, Baud
rate, FEC rate, and Network ID of this SAT.
4. If you want to edit any of the
default
values that are loaded with preset, press the
▼
arrow key to go to the next sub-menu parameter.
5. If you do not want to edit any other sub-menu parameters, press
SAVE
again to exit the
sub-menu and return to the SAT main menu display. From there you can press the
▼
arrow key to go to next SAT numeric menu choice or to the Factory Settings menu choice.
2.3.5.2. NAME
Enter or edit the 6 character Name you want to use for this saved satellite.
1. Press the
NEXT
key to select this sub-menu parameter for adjustment.
2. A cursor will appear under the leftmost character. Press
▼
&
▲
arrow keys to
increment/decrement this character.
3. Press the
NEXT
key to move the cursor to the next character to the right. Press
▼
&
▲
arrow keys to increment/decrement this character.
4. Continue editing characters (6 max) until all desired characters have been set to create the
NAME you want to use for this satellite selection. Press the
SAVE key to save the NAME
parameter for this SAT.
5. If you want to edit any of the other
default
values that are loaded with preset, press the
▼ arrow key to go to the next sub-menu parameter.
6. If you do not want to edit any other sub-menu parameters, press
SAVE
again to exit the
sub-menu and return to the SAT main menu display. From there you can press the
▼
arrow key to go to next SAT numeric menu choice or to the Factory Settings menu choice.