Sea Tel ST14, Руководство по установке и обслуживанию

Страница: 44 / 84

Setup for Model ST14E ST14 Ku-Band TVRO
4-2
6. Press the ▼ arrow key to go to the next parameter.
4.3.3.
Access all of the SATA individual parameters via a sub menu. Choices are:
SATA - First Satellite Parameters
4.3.3.1. PRESET
This choice presets all of the other sub-menu parameters to factory defaults for the satellite you
choose to set this SAT to.
1. Press the
NEXT
key to select this parameter for adjustment.
2. Once selected, press
▼
&
▲
arrow keys to scroll through a list of choices which this SAT
can be preset to. This list may change in future software revisions. The current choices
are:
Empty Blanks/zeroes all parameters for this satellite, so switching satellites
(NEXT) will skip over the satellites you don’t want (
if you only use
ONE satellite, you should preset all of the other SAT selections to
be empty/blank
).
HtBd13 Hot Bird @ 13E
Astr19 Astra1 @ 19E
Astr28 Astra2 @ 28E
TkSt42 TurkSat @ 42E
3. When the desired choice is displayed, press the SAVE key to save the parameters for this
SAT. This saves the DEFAULT Satellite Name, Satellite Longitude, Lo Band and Hi Band
Horizontal frequencies, Vertical frequencies, Baud rates, FEC rates, and Network ID’s.
4. If you want to edit any of the
default
values that are loaded with preset, press the
▼
arrow key to go to the next sub-menu parameter.
5. If you do not want to edit any other sub-menu parameters, press
SAVE
again to exit the
sub-menu and return to the SAT main menu display. From there you can press the
▼
arrow key to go to next SAT numeric menu choice or to the Factory Settings menu choice.
4.3.3.2. NAME
Enter or edit the 6 character Name you want to use for this saved satellite.
1. Press the
NEXT
key to select this sub-menu parameter for adjustment.
2. A cursor will appear under the leftmost character. Press
▼
&
▲
arrow keys to
increment/decrement this character.
3. Press the
NEXT
key to move the cursor to the next character to the right. Press
▼
&
▲
arrow keys to increment/decrement this character.
4. Continue editing characters (6 max) until all desired characters have been set to create the
NAME you want to use for this satellite selection. Press the
SAVE key to save the NAME
parameter for this SAT.
5. If you want to edit any of the other
default
values that are loaded with preset, press the
▼ arrow key to go to the next sub-menu parameter.
6. If you do not want to edit any other sub-menu parameters, press
SAVE
again to exit the
sub-menu and return to the SAT main menu display. From there you can press the
▼
arrow key to go to next SAT numeric menu choice or to the Factory Settings menu choice.
4.3.3.3. LON
Enter or edit the
Longitude
position of this satellite. Range of acceptable values are 0-180, East or
West (E or W).
1. Press the
NEXT
key to select this sub-menu parameter for adjustment.
2. A cursor will appear under the East/West hemisphere character. Press
▼
&
▲
arrow keys to
set this character to the desired hemisphere (E/W).
3. Press the
NEXT
key to move the cursor to the number digit to the right. Press
▼
&
▲
arrow keys to increment/decrement this digit.