Sea Tel ST14, Руководство по установке и обслуживанию

Страница: 37 / 84

ST14 Ku-Band TVRO Setup for Model ST14M
3-5
7/8
SCPC
AUTO*
Automatically scans through all the available forced * (star’ed) FEC
rates. If the satellite does not generate an NID but does have a
unique combination of FREQ, BAUD and FEC lock, select the
appropriate FEC* choice from this list. The system will then
generate its own unique forced NID to represent the desired
satellite. You will need to enter this pseudo NID in the
NID
setting
below.
1/2*
2/3*
3/4*
5/6*
6/7*
7/8*
NBIF
3. When the desired choice is displayed, press the
SAVE
key to save the parameters for this
SAT. This saves the FEC rate to use for this SAT.
4. If you want to edit any of the
default
values that are loaded with preset, press the
▼
arrow key to go to the next sub-menu parameter.
5. If you do not want to edit any other sub-menu parameters, press
SAVE
again to exit the
sub-menu and return to the SAT main menu display. From there you can press the
▼
arrow key to go to next SAT numeric menu choice or to the Factory Settings menu choice.
3.3.4.7. NID
Enter or edit the best Network ID 4 digit HEX value for the receiver used to which is used to
identify & track this satellite.
1. Press the
NEXT
key to select this sub-menu parameter for adjustment.
2. A cursor will appear under the rightmost digit. Press
▼
&
▲
arrow keys to
increment/decrement this digit (only valid HEX values 0-F will be displayed).
3. Press the
NEXT
key to move the cursor to the digit to the left. Press
▼
&
▲
arrow keys to
increment/decrement this digit.
4. Continue editing until all 4 digits have been set to the desired NID for this satellite
selection. Press the
SAVE key to save the NID parameter for this SAT.
5. If you want to edit any of the other
default
values that are loaded with preset, press the
▼
arrow key to go to the next sub-menu parameter.
6. If you do not want to edit any other sub-menu parameters, press
SAVE
again to exit the
sub-menu and return to the SAT main menu display. From there you can press the
▼
arrow key to go to next SAT numeric menu choice or to the Factory Settings menu choice.
3.3.5.
Access all of the SAT2 individual parameters via a sub menu. If a second SAVED satellite is not needed,
preset SAT2 to empty/blank so
NEXT
will skip over this selection when you are switching satellites.
SAT2 - Second Satellite Parameters
All of the SAT2 parameters are set exactly the same way that the SAT1 parameters were set, but would be set
to different choices. Refer to the parameter setting information in the SAT1 – First Satellite Parameters
paragraphs to set PRESET, NAME, LON, RHCP freq, BAUD, FEC, and NID for a second satellite that you wish to
use periodically.
3.3.6.
Access all of the SAT3 individual parameters via a sub menu. If a third SAVED satellite is not needed, preset
SAT3 to empty/blank so
NEXT
will skip over this selection when you are switching satellites.
SAT3 - Third Satellite Parameters
All of the SAT3 parameters are set exactly the same way that the SAT1 parameters were set, but would be set
to different choices. Refer to the parameter setting information in the SAT1 – First Satellite Parameters