Sea Tel ST14 Скачать руководство пользователя страница 26

Страница: 26 / 84

Setup for Model ST14 D

ST14 Ku-Band TVRO

2-6

2.3.5.6.

FEC

Enter or edit the best

Forward Error Correction rate

for the receiver to use for this satellite.

This choice presets all of the other sub-menu parameters to factory defaults for the satellite you
choose to set this SAT to.

Press the

NEXT

key to select this parameter for adjustment.

Once selected, press

▼

▲

arrow keys to scroll through a list of choices which this SAT

can be preset to. This list may change in future software revisions. The current choices

are:

AUTO

Automatically scans through all the standard DVB & DSS FEC rates.

1/2

2/3

3/4

5/6

6/7

7/8

SCPC
AUTO*

Automatically scans through all the available forced

(star’ed) FEC

rates. If the satellite does not generate an NID but does have a

unique combination of FREQ, BAUD and FEC lock, select the

appropriate

FEC*

choice from this list. The system will then

generate its own unique forced NID to represent the desired
satellite. You will need to enter this pseudo NID in the

NID

setting

below.

1/2*

2/3*

3/4*

5/6*

6/7*

7/8*

NBIF

When the desired choice is displayed, press the

SAVE

key to save the parameters for this

SAT. This saves the FEC rate to use for this SAT.

If you want to edit any of the

default

values that are loaded with preset, press the

▼

arrow key to go to the next sub-menu parameter.

If you do not want to edit any other sub-menu parameters, press

SAVE

again to exit the

sub-menu and return to the SAT main menu display. From there you can press the

▼

arrow key to go to next SAT numeric menu choice or to the Factory Settings menu choice.

2.3.5.7.

NID

Enter or edit the best

Network ID

4 digit HEX value for the receiver used to which is used to

identify & track this satellite.

Press the

NEXT

key to select this sub-menu parameter for adjustment.

A cursor will appear under the rightmost digit. Press

▼

▲

arrow keys to

increment/decrement this digit (only valid HEX values 0-F will be displayed).

Press the

NEXT

key to move the cursor to the digit to the left. Press

▼

▲

arrow keys to

increment/decrement this digit.

Continue editing until all 4 digits have been set to the desired NID for this satellite
selection. Press the

SAVE

key to save the NID parameter for this SAT.

If you want to edit any of the other

default

values that are loaded with preset, press the

▼

arrow key to go to the next sub-menu parameter.

Содержание ST14





















































































Результаты поиска

Содержание ST14

Отзывы:

Похожие инструкции для ST14

Бренды по названию

Популярные бренды

Sea Tel ST14, Руководство по установке и обслуживанию

Результаты поиска

Содержание ST14

Отзывы:

Похожие инструкции для ST14

Бренды по названию

Популярные бренды