Sea Tel ST14 Скачать руководство пользователя страница 25

Страница: 25 / 84

ST14 Ku-Band TVRO

Setup for Model ST14 D

2-5

2.3.5.3.

LON

Enter or edit the

Longitude

position of this satellite. Range of acceptable values are 0-180, East or

West (E or W).

Press the

NEXT

key to select this sub-menu parameter for adjustment.

A cursor will appear under the East/West hemisphere character. Press

▼

▲

arrow keys to

set this character to the desired hemisphere (E/W).

Press the

NEXT

key to move the cursor to the number digit to the right. Press

▼

▲

arrow keys to increment/decrement this digit.

Continue editing until all 3 digits have been set to the Longitude (0-180) position of this
satellite selection. Press the

SAVE

key to save the LON parameter for this SAT.

If you want to edit any of the other

default

values that are loaded with preset, press the

▼

arrow key to go to the next sub-menu parameter.

If you do not want to edit any other sub-menu parameters, press

SAVE

again to exit the

sub-menu and return to the SAT main menu display. From there you can press the

▼

arrow key to go to next SAT numeric menu choice or to the Factory Settings menu choice.

2.3.5.4.

RHCP (MHz) freq

Enter or edit the

Right Hand Circular

Frequency

(in MHz) for the receiver to use for tracking this

satellite. Range of acceptable frequency input is 950-2150 MHz

Press the

NEXT

key to select this sub-menu parameter for adjustment.

A cursor will appear under the rightmost digit. Press

▼

▲

arrow keys to

increment/decrement this digit.

Press the

NEXT

key to move the cursor to the digit to the left. Press

▼

▲

arrow keys to

increment/decrement this digit.

Continue editing until all 4 digits have been set to the desired tracking Frequency for this
satellite selection. Press the

SAVE

key to save the FREQ parameter for this SAT.

If you want to edit any of the other

default

values that are loaded with preset, press the

▼

arrow key to go to the next sub-menu parameter.

If you do not want to edit any other sub-menu parameters, press

SAVE

again to exit the

sub-menu and return to the SAT main menu display. From there you can press the

▼

arrow

key to go to next SAT numeric menu choice or to the Factory Settings menu choice.

2.3.5.5.

BAUD

Enter or edit the best

Baud rate

for the receiver to use for this satellite. Range of acceptable input

is 5000-30000 symbols per second.

Press the

NEXT

key to select this sub-menu parameter for adjustment.

A cursor will appear under the rightmost digit. Press

▼

▲

arrow keys to

increment/decrement this digit.

Press the

NEXT

key to move the cursor to the digit to the left. Press

▼

▲

arrow keys to

increment/decrement this digit.

Continue editing until all 5 digits have been set to the desired Baud rate for this satellite
selection. Press the

SAVE

key to save the BAUD parameter for this SAT.

If you want to edit any of the other

default

values that are loaded with preset, press the

▼

arrow key to go to the next sub-menu parameter.

If you do not want to edit any other sub-menu parameters, press

SAVE

again to exit the

sub-menu and return to the SAT main menu display. From there you can press the

▼

arrow key to go to next SAT numeric menu choice or to the Factory Settings menu choice.

Содержание ST14





















































































Результаты поиска

Содержание ST14

Отзывы:

Похожие инструкции для ST14

Бренды по названию

Популярные бренды

Sea Tel ST14, Руководство по установке и обслуживанию

Результаты поиска

Содержание ST14

Отзывы:

Похожие инструкции для ST14

Бренды по названию

Популярные бренды