Schmitz 114.9600.0 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 88

Schmitz 114.9600.0 Скачать руководство пользователя страница 7

Instructions for use arco-matic 200 M / 300 M - Version 2018-05-08 GBR ID no. 2038823A

7

Approved accessories

Accessories from SCHMITZ u. Söhne were devel-
oped for and tailored to this product (for a list of
accessories, see the table below). Third-party acces-
sories must be inspected and used with reference to
their instructions for use.

(*) The corresponding weight of the patient is indi-
cated in brackets.

Example: a safe working load of ‘‘60 (250) kg’’ means
that the accessory can support a weight of up to 60
kg. The part of the body that weighs 60 kg indicates
a total body weight of 250 kg.

Fig. 1

Notes regarding the following table (sample values)

Article no.

Description

Safe working load

as per IEC 60601-

1:2005, (*) in kg:

Net weight

per unit

in kg

:

101.0492.0

Foot supports for positioning the patient’s legs.

25

4

101.0464.0

Side rails for seat section (pair), 150 mm long, used to

attach side rail accessories

101.0466.0

Integrated double castor (set) for the examination and

treatment chair (‘‘mobility’’). Serves to transport the
examination and treatment chair without a patient.

101.0472.0

Magnetic head cushion for positioning the patient’s

head.

101.0474.0

Leatherette cover (pair) to improve the grip on the

Göpel leg support

101.0475.0

Protective covers (pair), to protect the foot supports

when used with shoes.

101.0482.0

2 sockets as power supply for accessories attached to

the examination and treatment chair, such as colpo-
scopes or examination lights

25 0.3

250 5

/ 0.51

/ 0.2

/ 0.1

/ /

101.0487.0 LED

illumination

/

/

101.0493.0

Göpel leg support with integrated handle, for posi-

tioning the patient’s legs during examination and treat-
ment.

25 6

101.0471.0

Extensible leg plate to position the patient’s legs

50

3

101.0467.0

Colposcope support (attachable on both sides) for

mounting colposcopes.

101.0473.0

Leatherette cover (pair) to improve the grip on the foot

support

101.0478.0

Foot supports, short (version), for positioning the

patient’s legs during examination and treatment

101.0481.0

Potential equalisation to reduce the patient leakage

current

101.0483.0

2 sockets for the Swiss market as power supply for

accessories attached to the examination and treatment
chair, such as colposcopes or examination lights

25 7

/ 0.2

25 4

/ /

/ /

101.0489.0

Paper roll, 500 mm wide, as hygienic cover for the pads. /

1.5

101.0019.0

Arm rest, serves to stabilise the patient’s arm

20

6.8

101.1670.0

Attachment clamp (piece) for mounting approved

accessories on the side rails.

25 0.7

101.0459.0

Göpel leg support for positioning the patient’s legs

during examination and treatment

see ‘‘Safe working

4

load’’ on page 45

«
...
5
6
7
8
9
...
»

Содержание 114.9600.0

























































































Отзывы:

Нет отзывов