manualshive.com logo in svg

Schmitz 114.9600.0, Инструкция по эксплуатации, Страница: 52 / 88

Поделиться
Скачать
Schmitz 114.9600.0 Скачать руководство пользователя страница 52

52

Instructions for use  arco-matic 200 M / 300 M  - Version 2018-05-08 GBR   ID no.  2038823A 

Adjusting the cradle   

The cradle can be adjusted sideways as desired. In 
doing so, the curved end of the cradle must face the 
seat section of the examination and treatment chair.

 

Loosen the toggle screw of the cradle.

 

Align the cradle to the desired position.

 

Re-tighten the toggle screw of the cradle.

WARNING!

Insuffi

  ciently secured accessories can come loose 

under load, which many cause injuries or damage to 
property. 
Prior to use, ensure that all accessories have been 
properly secured. 

  

Fig. 71  
Fixing the cradle in place   
1) Cradle 2) Toggle screw of the cradle

Fixing the lower leg in position

 

Open the fastening strap.

 

Place the lower legs of the patient in the cradle.

 

Fit the fastening strap around the patient’s lower 

leg. The fastening strap must run through the 
buckle at the bottom of the cradle.

 

Close the fastening strap with the Velcro fastener.

  

Fig. 72  
Closing the fastening strap 
1) Fastening strap

Replacing the leatherette cover (optional, 
101.0474.0  )

The leatherette cover can be removed for cleaning or 
replacement. 

 

Unzip the leatherette cover. Pull off  the leather-

ette cover.

 

Place the new leatherette cover over the leg 

support stirrup. Thread the zipper.

 

Pull the leatherette cover over the leg support 

stirrup and smooth it down. Zip it closed.

  

Fig. 73 
Mounting the leatherette cover
1) Leatherette cover    

Содержание 114.9600.0

























































































Отзывы:

Нет отзывов