Schmitz 114.9600.0, Инструкция по эксплуатации, Страница: 59 / 88

Instructions for use arco-matic 200 M / 300 M - Version 2018-05-08 GBR ID no. 2038823A
59
Rinsing basin with convenient holder (101.0495.0)
CAUTION!
If the rinsing basin has been removed, the patient
may collide with the rinsing basin bracket when
getting on/off the chair.
Accordingly, insert the rinsing basin before the
patient gets on/off the chair!
This examination and treatment chair comes with
a rinsing basin as standard, but there is also an
optional rinsing basin with convenient holder avail-
able to order (article number 101.0495).
Both models of the rinsing basin measure 325 mm ×
175 mm (length × width). They are 65 mm deep. The
capacity is 2.5
l .
Standard rinsing basin Rinsing basin with
convenient holder
(article number
101.0495.0)
Manual tilt Automatically remains
horizontal
Can be locked at an
angle using hand wheels Locks automatically
Cannot be pulled out Can be pulled out
Tab. 12
Properties of the diff erent models
Inserting the rinsing basin

Hold the rinsing basin by its bottom.

Slide the rinsing basin forward or backward to the
desired position.
Removing

Slide the rinsing basin ahead to the stop.

Hold the rinsing basin at the two recesses (Fig. 81,
Pos. 3) and lift it from the rinsing basin bracket.
Cleaning
Information about cleaning, disinfecting and ster-
ilising the rinsing basin can be found in chapter
“Cleaning and disinfecting”, “Rinsing basin” on page
64.
Fig. 80
Pulling the rinsing basin forward
1) Rinsing basin
Fig. 81
Removing the rinsing basin
1) Rinsing basin 2) Rinsing basin bracket 3) Recesses