Schmitz 114.9600.0 Скачать руководство пользователя страница 42 | Manualshive

Страница: 42 / 88

Schmitz 114.9600.0 Скачать руководство пользователя страница 42

42

Instructions for use arco-matic 200 M / 300 M - Version 2018-05-08 GBR ID no. 2038823A

Rinsing basin

Tilting the rinsing basin

The rinsing basin tilts. The maximum and minimum
inclination apply.



Hold the edge of the rinsing basin as shown in Fig.

50.

Fig. 50
Tilting the rinsing basin, minimum inclination
1) Rinsing basin



Tilt the rinsing basin as required.

Fig. 51
Maximum inclination
1) Rinsing basin



Tighten the locking wheel.



The rinsing basin is now locked at the set angle.

This angle is linked to the seat plate. If the seat
height is adjusted, the inclination of the rinsing
basin will also change.

RECOMMENDATION

If the rinsing basin is locked in place, it will tilt when
the height of the seat is adjusted. Any liquids that
might be in the rinsing basin could spill onto the
fl oor, or items stored in the rinsing basin could fall
out.
Therefore, when adjusting the height of the seat,
adjust the position of the rinsing basin so that this
does not happen!

Fig. 52
Fixing the rinsing basin in place
L1) locking wheel

«
...
40
41
42
43
44
...
»

Содержание 114.9600.0

























































































Отзывы:

Нет отзывов